Fingerprint RFID ID Card Access Control Unit Kit With 600lbs Force Magnetic Lock

Fingerprint RFID ID Card Access Control Unit Kit With 600lbs Force Magnetic Lock
Fingerprint RFID ID Card Access Control Unit Kit With 600lbs Force Magnetic Lock
Fingerprint RFID ID Card Access Control Unit Kit With 600lbs Force Magnetic Lock
Fingerprint RFID ID Card Access Control Unit Kit With 600lbs Force Magnetic Lock
Fingerprint RFID ID Card Access Control Unit Kit With 600lbs Force Magnetic Lock
Fingerprint RFID ID Card Access Control Unit Kit With 600lbs Force Magnetic Lock
Fingerprint RFID ID Card Access Control Unit Kit With 600lbs Force Magnetic Lock
Fingerprint RFID ID Card Access Control Unit Kit With 600lbs Force Magnetic Lock
Fingerprint RFID ID Card Access Control Unit Kit With 600lbs Force Magnetic Lock

Fingerprint RFID ID Card Access Control Unit Kit With 600lbs Force Magnetic Lock

As a terminal designed for users who have common access control requirement, it works standalone and have the interface for third party electric lock, exit button, door sensor, alarm and bell. Keypad operation on the device is easy and convenient, such as enroll user, delete user and access control parameter settings etc. If a registered user verified, the device will export the signal to unlock the door.

Door sensor will detect the on-off state. If the door is unexpected opened or improperly closed, the alarm signal (digital value) will be triggered. If the device being illegally removed, the device will export alarm signal. External exit button is supported;it is convenient to open the door inside. Completely offline use, do not connect any PC terminal.

Reliable, durable and highly accurate. Reads finger and/or RFID cards (Can't support HID, Cobra, APCiK etc). Dentification Mode: Fingerprint / ID Card / Password. Access Control Interface: 3rd party electric lock, exit button, door sensor, alarm and bell.

Advanced Access Control Function: No. U disk Upload / Download: No. Alarm: Tamper alarm, door time out warning, wrong press warning.

Input Voltage: AC 110-240V (Worldwide voltage). Dimensions: 4.72Lx3.74Wx1.50H(in) / 120Lx95Wx38H(mm). With both NC / NO outputs, can control various types of electric locks.

Based delay control circuit, lock time can be in 0-15 seconds The circuit board has remote control port. Input Voltage: 12 or 24VDC. NC mode - (locked while supplied with power), fail safe.

Suitable for: Wooden door, glass door, metal door, fireproof door, etc. Safety function: Built-in voltage spike suppressor. Dimensions (body): 250Lx48.5Wx25H(mm) / 9.84Lx1.91Wx0.98H(in). The system supports NO LOCK and NC LOCK.

For example the NO LOCK (normally open at power on) is connected with "NO" terminal, and the NC LOCK is connected with "NC" terminal. When the Electrical Lock is connected to the Access Control System, you need to parallel one FR107 diode (equipped in the package) to prevent the self-inductance EMF affect the system, do not reverse the polarities. With the remote control, you don't have to annoyance about to open the door, as long as in your access control system fitted with remote control, you can press the remote to open the door remotely, the distance reach up to 50 meters, very convenient. Reading distance: 2-10mm / 0.08-0.39in.

Standard: EM4100 compatible (Can't support HID, Cobra, APCiK etc). Each keyfob has an uniqe ID number. Read only and not rewritable. 1 x Electric magnetic lock.

The item "Fingerprint RFID ID Card Access Control Unit Kit With 600lbs Force Magnetic Lock" is in sale since Friday, August 2, 2019. This item is in the category "Home, Furniture & DIY\Home Security\Door Entry Systems & Intercoms". The seller is "fredstore13" and is located in Bedfordshire. This item can be shipped to all countries in Europe, all countries in continental Asia, United States, Australia.


Fingerprint RFID ID Card Access Control Unit Kit With 600lbs Force Magnetic Lock